Microland (Shanghai) Limited
Main products:Double sided industrial tape,Double sided PE foam tape,Self Adhesive Tape,DIY Tape,Stationery Tape,Acrylic Foam Tape,Double sided non-woven tissue tape,Double sided tape,PSA Tape,Electronic Tape,OPP adhesive tape,Double sided adhesive tape for elevator,Do
Products
Contact Us
  • Contact Person : Ms. Han Phoebe
  • Company Name : Microland (Shanghai) Limited
  • Tel : 86-21-64648895-326
  • Fax : 86-21-64894112
  • Address : Shanghai,Shanghai,Building 4,NO. 599,Xinzhen Street,Xinqiao Town,Songjiang District,Shanghai
  • Country/Region : China
  • Zip : 201108

6100 PTFE electrical insulation tape (reinforced with glass cloth)

6100 PTFE electrical insulation tape (reinforced with glass cloth)
Product Detailed
electrical insulation tape - Resistance of environmental impact - Optimum using temperature: -75~265 degree - Anti-aging

6100 PTFE electrical insulation tape (reinforced with glass cloth)

1) Feature:

-Superior holding power

- Anti-aging

- Resistance of environmental impact

- Anti plasticizer transfer

- Optimum using temperature: -75~265°C 

2)Technical data sheet

Test Items

Units

Spec

ref .Std

Tensile strength at break

MPa

400-600N/25mm

JB/T 5970-91

Peel

N/25mm

6

JB/T 5970-91

Breakdown voltage

kv

0.95

GB/1408

Heat resistance

°C

-75-265

GB 11026

Elongation at break

%

3

JB/T 5970-91

The above data is presented in good faith based on samples tested and corresponded the average values, which can not be considered as binding by contract or by specifications. Since many different factors may influence the product’s performance ,we recommend to test the product prior to any application. Our technicians are ready to provide the further information and recommendation.

The data may be varied for further optimization of our products, the updated information can be forwarded upon request.  

3) Instructions

- Clean surface with alcohol cleaning agent. Ensure that the surface to be applied on is free of dust, water and grease.

- Cut the tape to the required length and paste the tape firmly on the back of the object.

- Remove the adhesive liner and press the object firmly on the cleaned surface.

To achieve maximum adhesive strength

- Do not apply force on the adhered object for 24 hours (min. 25 minutes).

- Apply at room temperature (25~30 °C ).

6100 PTFE electrical insulation tape (reinforced with glass cloth)



Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.